Wet abrasive wear behavior of WC-based cermet coatings prepared by HVOF spraying

In this study, three kinds of WC-based cermet coatings including WC–CoCr coating, WC–Ni coating and WC–Cr₃C₂–Ni coating were prepared by the high-velocity oxygen-fuel (HVOF) spraying process. Scanning electron microscopy (SEM), energy disperse spectroscopy (EDS) and Vickers hardness tester were used to analyze the microstructure and mechanical properties of these coatings. The WC–CoCr coating presented the highest average microhardness of 1205 HV_0.3, and then followed by the WC–Cr₃C₂–Ni coating (1188 HV_0.3) and the WC–Ni coating (1105 HV_0.3). The abrasive wear behavior of the WC-based coatings under the conditions of different applied loads and sediment concentrations were studied by a wet sand-rubber wheel tester. The results indicated that the abrasive wear loss rates of all the coatings increased with the increment of applied load or sediment concentration. In addition, the coatings with higher microhardness appeared to have higher abrasive wear resistance. The abrasive wear resistance of the WC-based coatings was 4–90 times higher than that of AISI 304 stainless steel under the same testing condition. The abrasive wear mechanism of the WC-based coatings was deduced to be the extrusion and removal of binder phases, as well as the fragmentation and peel-off of hard phases.     

武汉市一般人群血清中全氟及多氟烷基化合物浓度及其影响因素研究

目的 了解武汉市一般人群血清中全氟及多氟烷基化合物(PFASs)浓度,探索血清中PFASs浓度水平的影响因素。方法 以在武汉市某医院进行一般体检的人群为研究对象(n=67),通过超高效液相色谱-三重四级杆质谱(UPLC-TQ/MS)联用仪测定外周血清中12种PFASs浓度,采用多元线性回归分析方法分析一般人口学特征和血清中PFASs浓度的关联性。结果 武汉市一般人群血清中12种PFASs的平均浓度水平为11.60 ng/mL。全氟辛烷磺酸及其盐类(PFOS)和全氟辛酸及其盐类(PFOA)的贡献率较大,分别为45.03%和31.86%。男性人群血清中PFOS、PFOA、全氟己基磺酸(PFHxS)、全氟壬酸(PFNA)等主要化合物的浓度高于女性,其β值(95%可信区间)分别为0.708(0.313,1.104)、0.518(0.069,0.967)、0.724(0.388,1.059)和0.684(0.399,0.968)。同时,发现血清中PFOS、PFHxS、PFNA浓度和年龄呈正相关,其β值(95%可信区间)分别为0.062(0.042,0.081)、0.035(0.019,0.052)和0.030(0.016,0.045)。结论 性别和年龄对血清中PFASs浓度有影响,在进行人体PFASs暴露评估中应考虑这些因素。     

一种牵引供电系统地震灾害风险评估方法

电气化铁路牵引供电系统的安全可靠至关重要,然而部分地区牵引供电系统面临地震灾害威胁.为有效评估地震灾害下牵引供电系统的风险水平,该文首先采用蒙特卡洛方法模拟地震灾害并得到表征地震动强度的峰值加速度指标;然后通过分析系统主接线,建立系统的有向图逻辑模型,在此基础上,考虑系统停运概率、关键设备损失以及停运时间等因素定义风险指标,提出牵引供电系统地震灾害风险评估方法;最后选取西南地区某规划中的电气化铁路牵引供电系统作为算例,评估系统在地震灾害下的风险.结果表明,该文算法能有效量化牵引供电系统在地震灾害下的风险水平,可实现震后快速损失评估,为灾后抢险、应急物资调配提供参考,也可为牵引供电系统抗震规划提供理论依据.     

Encapsulation and characterisation of grape seed proanthocyanidin extract using sodium alginate and different cellulose derivatives

Grape seed proanthocyanidin extract (GSPE) has health benefits. However, these phenolic compounds undergo degradation reactions and have undesirable sensorial characteristics. GSPE was encapsulated using sodium alginate (SA), SA-methyl cellulose (MC) and SA-hydroxypropyl methylcellulose (HPMC) for promoting controlled release, pH stability, temperature and storage period tolerance of GSPE. The microcapsules were characterised using scanning electron microscopy (SEM) and Fourier transform infra-red (FTIR) analysis. The SA-MC and SA-HPMC microcapsules appeared to have a more compact surface than SA-alone microcapsules. FTIR analysis indicated successful immobilisation of GSPE into the polymeric microcapsules. Moreover, the SA-MC and SA-HPMC microcapsules showed higher thermal stability. The microcapsules showed a relatively higher amount of released GSPE at a pH above six than at a lower pH. The SA-MC and SA-HPMC microcapsules could be used to retain more GSPE content in the gastric phase and to release it in the intestinal phase for possible absorption. Furthermore, after 28 days of storage at 25 °C, the GSPE retention rate of the microcapsules was still higher than 80%. GSPE encapsulated in SA-MC and SA-HPMC microcapsules results in lesser degradation and can be absorbed more effectively. This method has potential for the delivery of colon-specific materials while exhibiting a sustained-release characteristic.     

Model Misspecification of Generalized Gamma Distribution for Accelerated Lifetime-Censored Data

Abstract

The performance of reliability inference strongly depends on the modeling of the product’s lifetime distribution. Many products have complex lifetime distributions whose optimal settings are not easily found. Practitioners prefer to use simpler lifetime distribution to facilitate the data modeling process while knowing the true distribution. Therefore, the effects of model mis-specification on the product’s lifetime prediction is an interesting research area. This article presents some results on the behavior of the relative bias (RB) and relative variability (RV) of pth quantile of the accelerated lifetime (ALT) experiment when the generalized Gamma (GG₃) distribution is incorrectly specified as Lognormal or Weibull distribution. Both complete and censored ALT models are analyzed. At first, the analytical expressions for the expected log-likelihood function of the misspecified model with respect to the true model is derived. Consequently, the best parameter for the incorrect model is obtained directly via a numerical optimization to achieve a higher accuracy model than the wrong one for the end-goal task. The results demonstrate that the tail quantiles are significantly overestimated (underestimated) when data are wrongly fitted by Lognormal (Weibull) distribution. Moreover, the variability of the tail quantiles is significantly enlarged when the model is incorrectly specified as Lognormal or Weibull distribution. Precisely, the effect on the tail quantiles is more significant when the sample size and censoring ratio are not large enough. Supplementary materials for this article are available online.     

Numerical simulation of friction stir-assisted incremental forming with synchronous bonding of heterogeneous sheet metals

Friction stir-assisted incremental sheet forming with synchronous bonding is developed as a novel variant of incremental sheet forming, by which the two sh     

Compressive behavior and energy absorption of polymeric lattice structures made by additive manufacturing

Frontiers of Mechanical Engineering - Lattice structures have numerous outstanding characteristics, such as light weight, high strength, excellent shock resistance, and highly efficient heat...     

Fingerprint optimization method for the indoor localization system

The accuracy of the indoor localization is influenced directly by the quality of the fingerprint. But the indoor localization algorithms in existence are almost conducted based on the original fingerprint which is not optimized. The k-means is introduced to optimize the fingerprint in this paper. And deleting the collected bad-points through the theory of cluster could make the fingerprint more accurate for the indoor localization algorithm. Compared with the indoor localization systems in existence, the result of experiments shows that the optimized fingerprint can increase the accurate of indoor localization with a higher probability.     

125I粒子条联合胆道支架植入治疗恶性梗阻性黄疸22例疗效分析

【摘要】　 　目的 研究和探讨125I粒子条联合胆道支架植入治疗恶性梗阻性黄疸的临床疗效。方法 2011年6月—2013年9月收治恶性梗阻性黄疸患者40例。行胆道支架植入术治疗患者18例，为对照组；采用125I粒子条联合胆道支架植入患者22例，为观察组。两组均采用经皮肝穿刺胆道引流（PTCD）并胆道支架植入。结果 观察组与对照组的平均胆道开通时间分别为（8.7 ± 0.7）和（6.2 ± 0.4）个月，两组比较差异有统计学意义（P < 0.05）。观察组与对照组术后平均生存时间分别为（11.4 ± 0.8）和（8.7 ± 0.5）个月，生存时间的差异有统计学意义（P < 0.05）。术后近期疗效及并发症两组之间的比较无明显差异（P > 0.05），但是远期疗效有显著差异（P < 0.05）。结论 与对照组相比，观察组的术后生存时间及胆道开通时间明显延长，对于125I粒子条联合支架治疗恶性梗阻性黄疸值得进一步临床研究。